How To Stain A Dining Room Table. Remove dust & condition the wood. Applying gf gel stain topcoat after this step your tabletop is complete!
I brushed on the stain in long strokes with the grain of the table. Minwax 63010444 fast drying polyurethane clear finish. And before you hit the top of that with the ebony stain, i would turn the table upside down, work on the back of it, sand the back just as much as the front, and then apply the stain to the underside of the table just to get a feel as to what it’s going to look like as a finished product.
After The 2 Hours Were Up, We Hand Sanded The Table Top With 220 Grit Sandpaper Until It Was Completely Smooth.
Next pull the 3″ chip brush through the gel stain in the same back and forth strokes. Let the stain sit overnight. Use the 4″ chip brush to apply the gel stain in straight back and forth strokes across the width of the table top.
Let First Coat Of Gel Stain Topcoat Dry And Repeat The Same Process Adding A Second Coat.
I thought i’d share another option that is pretty simple, that doesn’t remove any of the original surface through sanding, leaving those. For furniture that gets less abuse than a table top, i’d go for 6 coats of this wipe on poly. And before you hit the top of that with the ebony stain, i would turn the table upside down, work on the back of it, sand the back just as much as the front, and then apply the stain to the underside of the table just to get a feel as to what it’s going to look like as a finished product.
Repeat This Process, Applying At Least Two Coats Of Stain To Achieve The Best Results.
However, the chair fabric is just difficult to work with. I let it sit for a few minutes, then wiped the excess off with a rag. We have an heirloom dining room table that has been refinished once several years ago — probably a stain and a varnish (i’m just guessing).
Sand The Wood To Make Sure The Surface Is All Smooth.
Apply pre stain wood conditioner. How to strip and finish a tablefinishing expert teri masachi strips an old painted finish off of a mahogany dining room table and then refinishes it.tools an. Remove dust & condition the wood.
I Know You Spent Time Doing Them, But I'm Just Being Honest.
The first 2 or 3 coats don’t look great, because this finish is so thin. How to sand & stain a table 1. I waited about 8 hours then repeated the process.